jetson tx2 nx实现在ros1中yolov5实现
老师你好ss:
这个需要看你是否有这个环境，已经具备的话 就不需要了
jetson tx2 nx实现在ros1中yolov5实现
zufnm:
安装ros-yolov5还需要从头配置pytorch环境嘛，从anaconda到pytorch。
RuntimeError: Attempted to set the storage of a tensor on device “cuda:0“ to a storage on different
克里斯阿提:
谢谢问题解决了
RuntimeError: Attempted to set the storage of a tensor on device “cuda:0“ to a storage on different
老师你好ss:
我没遇见过 但我搜了一下 你看看这个连接https://blog.csdn.net/m0_56463417/article/details/137567759
RuntimeError: Attempted to set the storage of a tensor on device “cuda:0“ to a storage on different
克里斯阿提:
ValueError: setting an array element with a sequence. The requested array has an inhomogeneous shape after 1 dimensions. The detected shape was (6,) + inhomogeneous part. 老哥跑yolact遇到过这个问题吗